DSM SATURN ALTERNATOR WIRING
Saturn Alternator swap | DSMtuners - DSM Forums
Jun 15, 2020You will also need a longer bolt with a nut and lock washer to attach the tensioner to the alternator since the saturn unit is not threaded like the stock DSM alt. Wiring is pretty straight forward, the large yellow wire goes to the F(black) wire on the saturn connector and the small black wire goes to the L(black w/ white stripe) on the saturn connector.
DSM Saturn Alternator Adapter – Morrison Fabrications
DSM Saturn Alternator Adapter $40 Factory location adapter for use with factory DSM tensioner. When keeping the Saturn alternator in the factory location, the factory tensioner bracket won’t match up unless you flip it upside down and rearrange the tensioner bolt.
Saturn Alternator - Single Wire - Club DSM Canada
Mar 25, 2012The saturn alt can be ran with just the wire going to the battery. It is self exciting, thus doesn't need F. S just gives feedback to the alternator on how it is doing, and if it needs to work harder or less. L is for the dummy light on the dash telling you that the alternator isn't charging.[DOC]
GM Alternator Swap - DSM Frequently Asked Questions |
Web view1) Make/Model/Year these alternators are found one alternators are found on any Saturn from 91 to 97 with 1 (I think they all have 1, and 98 and 99 years may work also)2) 1g/2g wiring for the alternator(1G)The 1G connector is a 2 wire just like the Saturn alternator. The large yellow wire goes to the F terminal (black wire on the Saturn connector).
Saturn Alternator Swap (stock location) - Club DSM Canada
Aug 17, 2013There are 3 wires on the saturn alternator you need to consider, 'S' wire (only on the upgraded plug harness) goes to a load like your fuel pump or fuse block, this will tell the alternator exactly how much voltage to generate in order to keep the happy 14
Saturn Alternator - RTM Racing
This alternator is BRAND NEW, NOT REBUILT. NOTE: In order to wire this alternator into a DSM, it is VERY useful to have a Saturn alternator "pigtail" (which is a connector with a length of wiring attached). For details, please refer to the "Related products" link near the bottom of the page.
DSM Tensioner to Saturn Alternator Adapter – Morrison
The top hole would bolt to the top of the Saturn alternator and the bottom hole to the factory tensioner bracket. The two important dimensions are the hole center-to-center of 2-1/2″ and the spacer thickness of 1/4″. The rest are just how we would make it.