OBD0 TO OBD1 CONVERSION HARNESS
banggoodImage: banggoodOBD0 DPFI to OBD1 Conversion Harness Installation Instructions Connect the BROWN wire to one of the black wires on the 4-wire O2 sensor (O2 heater control).Connect the PURPLE wire to the green wire on the 4-wire O2 sensor (O2 ground).Connect the YELLOW wire to one of the black wires on the 4-wire O2 sensor (O2 12v switch).Connect the GREY wire to the white wire on the 4-wire O2 sensor (O2 signal).More items
OBD0 DPFI to OBD1 Conversion Harness Installation Instructions
Was this helpful?
Rywire - OBD0 to OBD1 ECU Conversion Harness
OBD0 to OBD1 ECU Conversion Harness : The OBD0 to OBD1 ECU Adapter Converts any: 1988-1991 Honda CRX - (Hf, Si or MPFI converted only) 1988-1991 Honda Civic - (Ex, Si or MPFI converted only) 1990-1991 Acura Integra to run any OBD1 1992-1995 ECU. PRICE: $ 135. ID: ECU-OBD0
OBD0 to OBD1 Replace ECU Jumper Conversion Wiring Harness
ECU OBD0 to OBD1 Jumper Conversion Harness Made for manual 5 speed applications only, will not work with automatic models. You will need the OBD1 ECU, Distributor, and 4 wire O2 sensor to use this harness with the vehicles listed below. Professional installation highly recommended.
OBD0 [MPFI] TO OBD1 CONVERSION PACKAGE
It should only be used with your stock engine harness. You must be using the original engine harness from your MPFI vehicle in order for this to work correctly. This package contains the: OBD0 to OBD1 ECU Jumper OBD0 to OBD1 or OBD2 Distributor Adpater Integrated VTEC Subharness (no soldering!)[PDF]
Boomslang Fabrication OBD0 to OBD1 Conversion Harness
OBD0 to OBD1 Conversion Harness Installation Instructions Version 1.5 Parts needed for this conversion - MPFI and DPFI vehicles • OBD1 or OBD2 distributor that fits your engine • Distributor connector (engine harness side) • OBD1 or OBD2 Honda/Acura 4-wire oxygen (O2) sensor • 4-wire oxygen sensor connector (engine harness side)
DIY obd0 to obd1 conversion harness!!! | Honda D Series Forum
Aug 18, 2011Hey just did my obd0 to obd1 conversion and thought that i should tell how easy it was to do! Part list -Obd1 ecu plugs-make sure to cut like 7inches of wire on the plugs (i went to the junk yard) -Obd0 ecu (use pm5,pm9 something dpfi) -obd1 dizzy (i got d15b7 on my y8 head)..
Converting your OBD0 to OBD1 - My Pro Street
Aug 28, 2013You can do this one of two ways, either put OBD0 plugs on your new distributor, or put OBD1 plugs on your engine harness. We prefer the second option, as that leaves your new distributor stock and resellable should you decide to go that route. Engine Harness OBD1 Distributor
Related searches for obd0 to obd1 conversion harness
obd0 to obd1 harnessobd0 to obd1 conversioncrx obd0 to obd1 conversionobd0 to obd1obd0 to obd1 wiring diagramobd1 to obd2 conversion harnessobd0 to obd2obd1 to obd2 conversion kit